text.skipToContent text.skipToNavigation
install a
Rheem
MODEL NO: TPI02
Tankpak Internal 02
Combining the benefits of mains pressure and continuous flow water heating.
REQUEST A QUOTE
Product Details

Features at a Glance

Energy Rating
6 star
Warranty*
5 years

Rheem Tankpak Series 2 is the next phase in commercial water heating, combining the benefits of mains pressure and continuous flow water heating.

Rheem Tankpak Series 2 is supplied with the controller, pump, in line filter and water heater power supply factory assembled, requiring only connection of the storage tank on site.

Features

  • 84% thermal efficiency 6 Star heat source
  • Vitreous enamel storage tank up to 82°C operation
  • Large flow 50mm storage tank fittings
  • Digital temperature display
  • Fully hot dip galvanised frame with Tankpak 2-18

Warranty Conditions. 5 years warranty on cylinder and heat exchanger, 1 year on parts and labour. 12 months warranty on Heat Exchanger when used with a thermostat setting exceeding 75°C

 

Tankpak Series 3 BACnet Address Codes

 

Specification

The water heater(s) shall be Rheem Tankpak Series 2 model no. ________ with an hourly input of ________ MJ and a hourly recovery rate of _______ litres through 50°C rise. The water heater(s) shall conform to AS4552. The water heater shall operate on the top down heating principle. The water heaters shall be factory assembled and tested and include thermostatic control, double redundancy timers and double redundancy pump relays housed in an IP44 enclosure. Deluxe models shall incorporate general purpose outlets for continuous flow water heater power housed in a water proof enclosure, and cold water inlet line strainer. The frame shall be hot dip galvanised and third party certified for wind loadings up to 74.87m/sec*. Models shall be suitable for wall, floor or back to back mounting, model dependent. Storage tanks shall be Rheem model no. 610340 with a storage capacity of 325 litres or 610430 with a storage capacity of 410 litres with heavy duty enamelling and 25mm sacrificial anode and shall be fitted with 50mm BSP connections. *74.87m/sec based on a Type 2 structure, 25 year design life, 1/250 ARI, Region C only.

 

Tankpak Series 3 BACnet Address Codes

 
    Delivery
    Lorem ipsum dolor sit amet, dolor sed, ut nam ut. Senectus mauris egestas a massa, enim placeat wisi congue purus fermentum. Ut aptent mauris dapibus congue in sit. Sed dolor varius amet feugiat volutpat dignissim, pede a rhoncus sodales aliquam adipiscing, dapibus massa fusce. Dui egestas ornare urna nibh facilisi, cras posuere. Lorem aliquam accumsan eleifend sem libero lorem, aliquam sequi sed urna nec. Eget dolor quisque dolor, amet suspendisse ullamcorper minus elit lectus nunc, est mattis dui id eu et facilisis, conubia sit tristique. Ac fusce gravida condimentum iaculis neque, a platea curabitur accumsan porttitor vel justo. Amet potenti ac, eget amet ducimus sit nulla, ac porttitor rhoncus, justo proin tortor integer turpis nulla vitae. Egestas mollis litora nunc platea dui, eu semper mauris diam, erat quam, porta maecenas fusce libero non aliquet. Amet tellus taciti ligula sed sollicitudin, nonummy cursus enim, hendrerit nec, sed lacus sed at sit quis, semper a arcu mollis sapien nec pretium. Ante mauris eros nec, nonummy mauris, nulla lacinia vel. Volutpat luctus velit eu.
    Brochures, Guides & Drawings

    Brochures

    Tankpak Series 3 Brochure
    Tankpak Series 3 BACnet Address Codes
    Performance Calculator